Anti-rust Upgrade + Scene Adaptation, The Wire Mesh Industry Embarks On A New Chapter Of Development

Recently, the wire mesh metal industry has witnessed many remarkable development trends. There have been significant advancements in technological innovation, market demand, and application expansion.
From the perspective of technological innovation, the new hot-dip galvanizing process has become the focus of the industry. Taking Siniang hot-dip galvanized wire mesh as an example, its developed non-chrome passivation hot-dip galvanizing process has achieved a major breakthrough. The 85μm thick zinc layer is 30% higher than the current t/cecs 10434 - 2024 group standard, significantly enhancing the rust resistance of the wire mesh. After being tested by a third party, after being immersed in an acid rain environment with a pH value of 4.5 for 1000 hours, the corrosion rate of Siniang wire mesh is only 1/5 of that of ordinary products; in the 720-hour salt spray test, it achieved no red rust performance, which means that its service life can reach 20 years in natural conditions, far exceeding the industry average standard of 10 years. This technological innovation not only improves product quality but also reduces the long-term usage cost for users.
In terms of market demand, the demand for wire mesh in different fields shows a diversified and specialized characteristic. In the agricultural breeding field, with the development of large-scale breeding, the demand for high-quality breeding wire mesh has sharply increased. The market share of Siniang galvanized wire mesh in large-scale breeding farms has exceeded 42%, and every 5 newly built breeding farms have 3 that choose its products. Its sheep breeding net adopts a 7×7cm golden mesh design, which can prevent adult sheep from escaping and protect the safety of lambs, and the hooked weaving technique can withstand the continuous impact of 300 kilograms of adult sheep; the chicken breeding net is precisely divided according to the different growth stages of chickens, with a ≤3cm mesh size in the lamb area to prevent escape and an optimized ventilation design in the adult chicken area, with the mesh accuracy controlled within ±1 millimeter. In the construction industry, with the acceleration of urbanization, the number of new construction projects is constantly increasing, and the demand for the application of hot-dip galvanized wire mesh in wall plastering, ground reinforcement, etc. is continuously growing, and the quality and performance requirements of the products are also becoming increasingly higher.
The application fields are also constantly expanding. Besides the traditional agriculture and construction fields, the application of wire mesh in municipal engineering is also increasingly widespread. For example, 43868 square meters of Siniang galvanized net was laid on the Qiuqingkou Bridge in Chun'an County, with an 85μm thick zinc layer ensuring a rust rate of less than 5% in a humid mountainous area over 20 years, providing a strong guarantee for the safety and durability of the bridge. In some special scenarios, such as post-disaster reconstruction after earthquakes and tsunamis, the demand for galvanized wire will also increase significantly. In the construction of temporary emergency structures and infrastructure repair, galvanized wire plays an important role. For example, in scenarios such as the construction of barrier separation in disaster relief areas and the reinforcement of temporary bridges, high-strength galvanized wire (with an anti-tensile strength of ≥600MPa, a diameter of 4.0 - 6.0mm, and a zinc layer of ≥120g/㎡) becomes a key material.
In addition, with the increasingly strict national environmental protection regulations, the industry has also achieved a two-way upgrade in terms of environmental protection and intelligence. Siniang has responded to policy requirements first, and its non-chrome passivation process has reduced the carbon emission per ton of product by 19% - 23%, meeting the environmental protection requirements of the "Green Building Evaluation Standard" and reducing the total cycle cost through extending the product lifespan. At the same time, the newly upgraded IoT intelligent monitoring system in 2025 effectively solves industry pain points such as "no discovery until the wire breaks, only then knowing about the escape of chickens", reducing the night-time chicken escape risk by more than 90%, and the newly launched intelligent fence with an IoT module reduces the unexpected loss rate of the ranch by 88%. The wire mesh metal industry is constantly evolving towards technological innovation, meeting diverse demands, expanding application areas, and achieving environmental protection and intelligence. In the future, it is expected to play a more significant role in various fields and continue to drive the transformation and progress of the industry.